quality machine tool technology

XTECH 630 INDUSTRY 4.0 READY*

band saws, twin pillar, automatic, steel and aluminum cut, straight cut

High production twin column bandsaws, the X-TECH 630 is suitable for avariety of cutting requirements,combining advanced technology with an extremely solid mechanical structure.

  • It has one system that allows the vices to ‘back off’ to avoid the blade rubbing on the cut surface during the ascent of the sawframe for the next cut.
  • The added advantage of this design enables the use of high performance TCT bandsaw blades. Hydraulically pressure of ground TCT blade guides for maximum precision and squareness of cut.
  • With the option “Short Batch & ‘One Off’ Sawing” there is the possibility to cut not completely the material section in automatic cycle.
  • Automatic Trim Cut option, if the material has an accettable pre sawn face, it will be accurately & automatically located relative to the blade ‘zero’position. This feature saves time and cuts down on material wastage.
  • All operating functions of the machine, errors and problem solving messages are clearly displayed.
  • A device for checking the accuracy/ squareness of the cut, with automatic adjustment or stopping of the sawframe descent speed in the event of blade deviation.
  • For cutting till 630 mm. round and square.
  • *The modem for Industry 4.0, teleservice and remote control is supplied as an optional
Area of angular Cut ° 90
Cutting capacity at 90°: round / square / rectangular mm. 630 / 630 / 630x630
Cutting capacity at 90°: rectangular with cutting bundle mm. 630 x 500
Blade dimensions mm. 8200 x 54 x 1.6
Inclination of the Blade ° 0
Blade Motor Power KW 7.5
Run of Feeder Carriage (repeatable) mm. 500
Feeder motor power KW 2.2
Scrap end mm. 20
Blade speed mt/min. 9 ÷ 90
Motor Hydraulic Unit KW 2.2
Capacity Tank Hydraulic Unit Lt 90
Capacity Coolant Tank Lt 320
Dimensions ( B x L x H ) mm. 4100x2250x2500
Height of Work-table mm. 800
Weight Kg 6.700
Minimum Cuttable Length mm. 6
Type of functioning   semiautomatic/automatic CNC
Suitable for cutting :   Steel / cast iron / high-strength steels / alloys

 

Enquire Now
Back